First of all, if you have a store near you, we invite you to go there. Your dealer will provide you with quality advice and will be your preferred intermediary with ROOF. You can also try our helmets directly, choose the right size for you and leave immediately.
In principle, your ROOF helmet size corresponds to your head circumference in cm at the forehead (do not "over-tighten" or "over-release" the tape measure during measurement).
Your head should be held in the helmet, without having strong pressure that can lead to discomfort on the road. For our ROOF helmets, we normally recommend to opt for a size 60 if you have just 60.5 cm of head circumference for example. If not, round to the nearest unit.
But it is true that nothing can replace a test to be sure that it suits you, each head having its own morphology.
Specific information RO200 22-05: on the RO200 (E22-05), there are two hulls, the small hull goes up to size 58 and the large hull starts from size 59. The caps are therefore not interchangeable between size 58 and 59. The size 58 is in the small shell, the cheeks in 58 are therefore already the thinnest for this shell. In addition, this size 58 in this model size " small ", we advise thus those who have 58,5 or + of turn of head to pass on the 59 generally it suits better. It may sometimes be more comfortable to opt for a size 59 in the large shell, or even with cheek pads 59+ (optional, available on the site or ordered from your dealer).
Note that we have adjusted the size 58 for our new RO200 Carbon models in E22-06: there are now 3 sizes of shells for a better fit to your head circumference.
Some helmets like our BOXXER modular have additional foams included in the accessories supplied as standard with these helmets. You can insert/remove these foams in the cap of these helmets to perfect the fit of your ROOF helmet to your head.
Also note that all our helmets are predisposed for the glasses and to accommodate the market intercom kits. However, we invite you to try and check the comfort and size in case of very thick frames or a very large intercom kit for example. Depending on the size of your helmet and your head morphology, you may have more or less space and prefer to change to a larger size according to your feeling.
Before your purchase, do not hesitate to ask us for advice by sending us an email via the form on our site. Some helmets have specific characteristics and our teams will give you all the useful information to guide you in the best way.
We invite you to purchase from our dealers, where you will find good advices, try our helmets or benefit from specific sales services.
We are manufacturer first and foremost, and it is possible that we do not offer the same services as our reseller whose activity is primarily.
Before placing your order on our site, please note that we do not exchange when the products are delivered because we are not organized for this.
You will need to return your order with the withdrawal form (see withdrawal terms in the link general conditions of sale at the bottom of the site) so that we will be able to refund you, then place an order again on our website.
Our teams are available to advise you in this process. For this, do not hesitate to contact us via the online form on our website.
Our answer in one sentence:
Here are some additional details that may be useful to you:
All our helmets are predisposed to be worn with glasses and to accommodate the market’s intercom kits.
Of course as any helmet on the market, we recommend you to try and check the comfort and size in case of very thick glasses frames or a very voluminous intercom kit for example. Depending on the size of the helmet and the morphology of your head, there may be more or less space and you may prefer to change to a larger size or adjust the inner comfort according to your feeling.
Regarding the BOXXER 2 or BOXXER 2 CARBON (E22-06), please note that they are Intercom Ready
Here are some models of intercom that our teams or fans use with our Boxxer, for example
: Sena 50S, SENA 10R, Cardo Packtalk Slim etc. But many models are on the market and new ones arrive every year, you have to discover them.
Our BOXXER and BOXXER CARBON E22-05 are also equipped with specific slots to accommodate the earphones of intercom kits.
Tutorial for the assembly: At the bottom of each comfort cheek, you will find a foam mounted on a velcro. This foam can be removed to give more space at the ears and thus position the earphones. We advise you to position the earphones at the top of the shape of " Y " of the jugular to avoid overlaying the earphone. You can even slide the earphone slightly under the calotin, between shell and calotin for even more comfort.
For the BOXER V8, here is an example of intercom assembly tutorial:
Our DESMO are also compatible with intercom kits. At the bottom of the comfort cheeks of DESMO, where the ears are placed, you will find a triangular foam that is fixed by Velcro.
This foam can be removed to accommodate the earphones of the hands-free kit. Each kit is really different from one model to another, so the tutorial may vary a bit.
But here is for example a tutorial to mount the Sena SMH5 kit on a DESMO. This kit with a microphone mounted on rod and not a system to be glued in the chin strap, we advise you to do so:
Our RO200 et RO200 CARBON are also predisposed to receive an intercom.
In general, the earphones can be placed in the intercom recess.
However, depending on the models of headphones and the size of your headset, you can choose to move the headphones down for better comfort: the placement of the headphones is not limited to the area in the outer shell, You can position the earphones lower, behind the comfort cheeks, if you feel the need. The earpiece will be positioned between the comfort cheek and the shock absorber.
For the ROADSTER, we recommend the same installation recommendations as our modular BOXXER.
It is also advisable to opt for a microphone with a rod and not a microphone to be stuck on the front of the chin strap, since it is a MASK.
Our ROADSTER are equipped with specific slots to accommodate the earphones of intercom kits. At the bottom of each comfort cheek, you will find a foam mounted on a velcro. This foam can be removed to give more space at the ears and thus position the earphones.
We advise you to position the earphones at the top of the shape of " Y " of the jugular to avoid overlaying the earphone. You can even slide the earphone slightly under the calotin, between shell and calotin for even more comfort.
We hope that all these tutorials and explanations will be useful and help you to easily mount your intercoms on your ROOF helmets.
All our teams are available for any further information on this subject.